| Construction | Material: | Aluminum alloy. The surface is treated by anodic oxidation. |
| Lens type: | ZWB2 glass filter | |
| Reflector: | smooth, made of aluminium alloy, the reflective surface is vacuum-coated. | |
| LED MCPCB: | made of copper. DTP thermally conductive structure. 3.0 W/(m·K) thermal grease below the MCPCB. |
|
| Head structure: | brass pill inside, Easy to disassemble. | |
| Switch: | reverse type, Au-coated phosphor copper spring soldered on the PCB, | |
| Tail: | two holes for lanyard, silicone button | |
| Electro&optical parameters | Driver output: | 7135*5 , Because the voltage of UV led is relatively high, the maximum output current is usually about 1.2A |
| Driver type: | PWM linear | |
| Driver efficiency: | ? | |
| Mode: | only one mode 100% | |
| Φe: | ? | |
| Runtime: | around 3 hours @3500mAh battery | |
| Related features | Low voltage warning: | No, Because the UV led voltage is relatively high.When the battery voltage is too low, the flashlight automatically stops working. |
| Reverse polarity protection: | Yes | |
| Tailstand: | Yes | |
| About the battery | Battery included: | No |
| Required battery type: | protected or unprotected 18650 lithium battery | |
| Required battery quantity | 1 piece | |
| Size & weight | Length: | 121mm |
| Diameter: | 24.2mm | |
| Weight: | net weight 74g gross weight 86g |
|
| Accessory: | 1* lanyard , 1* clip | |
WRITE A REVIEWSEE ALL
