PARAMETER
- Material: Aluminum Alloy
- Lens type: ar-coated glass
- Reflector: Orange peel for XHP70.3 HI , GT FC40 ; Smooth for SFT40
- Driver output: 6V 5A for XHP70.3 HI ; 12V 2.5A for GT FC40 ; 3V 8A for SFT40
- Recharging current: max 2A
- Reverse Charge Current: 2A
- Low voltage warning: Yes
- Reverse polarity protection: Yes
- Temperature control function: Yes, As the temperature rises, the current will drop slowly, but this does not mean that the surface of the flashlight will not heat up.
- Mode memory: Yes
- Tailstand: Yes
- Battery included: No
- Required battery type: IMR26650 or IMR18650 (The continuous discharge current is greater than 10A)
- Required battery quantity: 1pcs
- Height: 149mm
- Diameter(head/body/tail): 48.1mm/35.6mm/38.1mm
- Weight: 290g
Mode operation instructions:
1.click the button ——> flashlight is turned on with last brightness ——> press the button,brightness ramping up ——> release and press the button again,brightness ramping down
2.flashlight off, press the button ——> moonlight mode 0.2% [This brightness will not be remembered]
3.flashlight on or off, 2-click the button ——> turbo 100%
4.flashlight off,3-click the button ——> strobe
5.flashlight off,4-click the button ——> tactical mode, only 100% ,4-click the button again to quit tactical mode.
6.flashlight off,5-click the button ——> voltage detection (* means “flash” , *** pause ******* means 3.7V, )
7.flashlight off,6-click the button ——> normal ramping mode switch to 4modes 1%-10%-40%-100%
8.flashlight off,10-click the button ——> Lock mode,The flashlight will flash once under any operation, which means the flashlight is locked.10-click the button again to quit lock mode,Please note that this is the only way to unlock.
The flashlight has low voltage protection and temperature control protection.
WRITE A REVIEWSEE ALL
