About the host, 7mm / 9mm / 10mm means the diameter of the reflector bottom hole.
PARAMETER
Material: Aluminum Alloy
Lens type: ar-coated glass lens
Reflector: smooth for XPL HI, SST20, SST40, SFT40, KW CSLNM1.TG, KW CSLPM1.TG, KW CULPM1.TG,
orange peel for 219, LH351D, 519A, XHP50.3 HI, XHP70.3 HI, B35AM, 719A
Driver: 3V 3A for XPL HI , SST20, 219
3V 5A for SST40, KW CSLNM1.TG , KW CSLPM1.TG, LH351D, 519A
3V 8A for SFT40, KW CULPM1.TG
6V 2A for B35AM , 719A
6V 4A for XHP50.3 HI
6V 5A for XHP70.3 HI
Low voltage warning: Yes
Reverse polarity protection: Yes
Mode memory:Yes
Tailstand: Yes
Battery included: No
Required battery type: INR or IMR 18650 unprotected lithium battery
Required battery quantity:1pcs
Diameter(Head/Body/Tail): 35.6 / 24.9 / 26.8 mm
Length: 133.6mm
Weight:110g
4 modes 0.1％-3％-30％-100％
12 groups
1.click the switch to turn the flashlight on/off,tap the switch to select mode
2.if flashlight is turned on,tap the switch 20 times quickly to enter into config mode.(On a visual interface,as long as you click on an option, it means that the option is selected. The flashlight has no visual interface. It flashes to represent an option, and “tap the switch in the flashing process” means to select the option.)
Option 1 (normal-flash 1 time + buzz-flash): tap the switch to enter into sub-option to select the mode group,If the user has no operation, the config mode will enter option 2.
————-sub-option 1.1 (normal-flash 1 time) : tap the switch to select mode group 1 (0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check)
————-sub-option 1.2 (normal-flash 2 times) : tap the switch to select mode group 2 (0.1%, 1%, 10%, 35%, 100%)
————-sub-option 1.3 (normal-flash 3 times) : tap the switch to select mode group 3 (100%, 35%, 10%, 1%, 0.1%)
————-sub-option 1.4 (normal-flash 4 times) : tap the switch to select mode group 4 (1%, 20%, 100%, strobe, biking, battery-check, SOS)
————-sub-option 1.5 (normal-flash 5 times) : tap the switch to select mode group 5 (1%, 20%, 100%)
————-sub-option 1.6 (normal-flash 6 times) : tap the switch to select mode group 6 (100%, 20%, 1%)
————-sub-option 1.7 (normal-flash 7 times) : tap the switch to select mode group 7 (0.1%, 1%, 10%, 50%, strobe, biking, battery-check, SOS)
————-sub-option 1.8 (normal-flash 8 times) : tap the switch to select mode group 8(0.1%, 1%, 10%, 50%)
————-sub-option 1.9 (normal-flash 9 times) : tap the switch to select mode group 9 (50%, 10%, 1%, 0.1%)
————-sub-option 1.10 (normal-flash 10 times) : tap the switch to select mode group 10 (1%, 10%, 35%, 100%)
————-sub-option 1.11 (normal-flash 11 times) : tap the switch to select mode group 11 (100%, 20%, strobe)
————-sub-option 1.12 (normal-flash 12 times) : tap the switch to select mode group 12(100% only)
Option 2 (normal-flash 2 times + buzz-flash): tap the switch to active the mode memory or inactive it,If the user has no operation,flashlight will enter into the last mode.
battery-check instructions:
<2.95V 1 flash,
2.95-3.25V 2 flashes,
3.25-3.55V 3 flashes,
3.55-3.85V 4 flashes,
>3.85V 5 flashes
